Oil Can #2

I was greatly inspired by Hackmasters beautiful oil can clone. I decided to do a run of my own with a simpler design. It was suggested that I start a new thread here and not hijack the other thread.
The plan was originally solid brass. I realized that the pump housing would add too much weight so I went with an aluminum pump housing.

I was sort of emulating this original as posted by Hackmaster:

EAGLE66.jpg



Here is the base pattern:


14%2B-%2B3.jpg


14%2B-%2B2.jpg


14%2B-%2B1.jpg


Its about 3/16" thick at the edge. I will turn it down more when it is brass.


R
 

Attachments

  • EAGLE66.jpg
    EAGLE66.jpg
    25.4 KB · Views: 764
  • EAGLE66.jpg
    EAGLE66.jpg
    25.4 KB · Views: 763
  • 14%2B-%2B3.jpg
    14%2B-%2B3.jpg
    55.1 KB · Views: 759
  • 14%2B-%2B3.jpg
    14%2B-%2B3.jpg
    55.1 KB · Views: 757
  • 14%2B-%2B2.jpg
    14%2B-%2B2.jpg
    62.4 KB · Views: 757
  • 14%2B-%2B2.jpg
    14%2B-%2B2.jpg
    62.4 KB · Views: 759
  • 14%2B-%2B1.jpg
    14%2B-%2B1.jpg
    55.7 KB · Views: 755
  • 14%2B-%2B1.jpg
    14%2B-%2B1.jpg
    55.7 KB · Views: 757
Last edited:
The pump is just my own design. I have no idea how the original ones worked. I have never dissected one.
 
Yes, the pump works fine. I have two of them next to my lathe. Spindle oil in one and WD-40 in the other one.
 

Attachments

  • IMG_0384.jpeg
    IMG_0384.jpeg
    226.2 KB · Views: 12
  • Like
Reactions: rwm
Back
Top