- Joined
- Dec 19, 2017
- Messages
- 16
I just bought this machine, pretty happy with the possibilities it offers. I don't know much about it other than what Ive been able to pick up off the web. There is no name plate, id tag or anything on it.
I have a couple of ancient lathes, but have seen quite a few times that I wished for a small mill. I know it needs a lot of work before it's usable, but I have more time than money anyway. All that came with it is the drill chuck. The vise and rotary table were just for decoration...
Does anyone know anything about this quill power-feed setup. The pulleys that drive the feed are set up to be powered by a round o-ring type belt. Thanks
I have a couple of ancient lathes, but have seen quite a few times that I wished for a small mill. I know it needs a lot of work before it's usable, but I have more time than money anyway. All that came with it is the drill chuck. The vise and rotary table were just for decoration...
Does anyone know anything about this quill power-feed setup. The pulleys that drive the feed are set up to be powered by a round o-ring type belt. Thanks