One day I had a plan

And the cylinderheads. 2 valves 2 ignitionplugs

cilhead917b_zps5bfc3bc9.jpg

cilhead917b_zps5bfc3bc9.jpg
 
Hi RHB,
What rendering program are those pictures coming out of?? Is that all part of the "bendtech" program? It can't be. :yikes:
But those are fabulous renderings!
Have you started building it yet?
 
Last edited:
Hi RBH,
What rendering program are those pictures coming out of?? Is that all part of the "bendtech" program? It can't be. :yikes:
But those are fabulous renderings!
Have you started building it yet?

I have used Vray . But I'm not familiar with bendtech. So what do you mean?
And yes I have started building and also finished. But about that later.

Rijk
 
Oh... sorry, I see now that I was responding to comments made by Rbeckett regarding the "bendtech" program.

So! You are going to make me/us wait for the final product? Heh!
 
A lot of other stuff was drawn to complete the engine.
Herewith a kind of exploded view

exploded_zps03933bb2.jpg

exploded_zps03933bb2.jpg
 
To do something different then drawing I made me a piston. Here seen with a nut M6.

pist01_zps4abe845e.jpg

pist01_zps4abe845e.jpg
 
Okay now lets start building the engine
First we take the right side of the vertical splitable motorcarter.

917assem01_zps6978bbf3.jpg

Then we put in the crankshaft

917assem02_zpsf65fb9a5.jpg

917assem01_zps6978bbf3.jpg

917assem02_zpsf65fb9a5.jpg
 
Twelve conrods (a little hard to see) were attached to the crankshaft. Six sticking up and six down

917assem03_zpsf0d3647e.jpg

The next step 3 shafts. The one beneath the cranckshaft goes to the transmission.
The other one above the cranckshaft will drive the two ignition distributors on each side of the engine and the shaft that sticks right up in the middle that will drive the cooling fan.


917assem04_zps60613723.jpg

917assem03_zpsf0d3647e.jpg

917assem04_zps60613723.jpg
 
Because the engine has a dry sump system an oil pump is placed at the lowest point of the motor carter.


917assem05_zps8488c463.jpg




The other carter half is placed and also the main oil pump in the front of the engine.
This pump is directly driven by the crankshaft and is also one of the 3 points which connect the engine to the frame.



917assem06_zps29f0ede4.jpg

917assem05_zps8488c463.jpg

917assem06_zps29f0ede4.jpg
 
Back
Top