Palmgren sine vice

Shootymacshootface

I make little metal out of big metal.
Registered
Joined
Mar 17, 2018
Messages
1,400
I'm supposed to be getting this tomorrow off of CL. The guy wants $20. Its going strait into the blasting cabinet after I take it apart.Screenshot_20181109-152959.png
 
I'm supposed to be getting this tomorrow off of CL. The guy wants $20. Its going strait into the blasting cabinet after I take it apart.View attachment 279430

The vise pictured isn't a sine vise. It's an angle vise. A sine vise has two cylinders between the vise and the bottom plate that are spaced a precise distance apart for the purpose of precisely setting an angle.

However, if it is a Palmgren, a new angle vise still goes for about 6x the asking price.
 
The vise pictured isn't a sine vise. It's an angle vise. A sine vise has two cylinders between the vise and the bottom plate that are spaced a precise distance apart for the purpose of precisely setting an angle.

However, if it is a Palmgren, a new angle vise still goes for about 6x the asking price.
Thanks for the info RJ.
 
Back
Top