- Joined
- Oct 31, 2016
- Messages
- 2,637
This may be in the wrong forum. I have an armstrong no. 19 parting tool holder. It takes a blade just smaller than 1/2." The listed size is 3/32 x 1/2 nominal. The part number in old armstrong catalogs is 2401. Imported blades are a true 1/2" and won't fit. In searching the usual suppliers they were quoting very hefty prices for these blades. I was looking on Ebay and saw a listing for armstrong 3/32x1/2 cut off blades. Part no 86-471. The seller couldn't tell me what the actual size of the blade was. After more searching I ultimately found a cross reference for 86-471 to 2401. I ordered one blade and sure enough it fits. The cost was $5.50 plus $3 shipping. I plan to order a couple more of these blades.
Here is the link. https://www.ebay.com/itm/Armstrong-...e=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649
Hope this helps other forum members who might be looking for these blades.
Here is the link. https://www.ebay.com/itm/Armstrong-...e=STRK:MEBIDX:IT&_trksid=p2060353.m1438.l2649
Hope this helps other forum members who might be looking for these blades.