Pass Around 2018

Status
Not open for further replies.
This is what I have taken from the box 20180608_102042.jpg

And here are the tools that I removed that I put in the box the last time I had it.
20180608_102058.jpg
 
Don’t know what that stuff is that didn’t get taken except for the giant easy out , I think things that go in the box should be for hobby type machining not specially items for production type machines, that us hobby guys don’t have .
Looks like you took some useful tools out , hopefully useful tools go back in it.
 
I almost forgot to post a picture of these... I also took a 1/2" Hex Wrench and some bearing babbitt slugs.To whoever put the babbitt in there: I love you.
20180608_164746.jpg
 
For some reason every time I have put stuff like that in there, They do not last long. IT has been ages since I did any bearings with it. It is almost like when I use to body work with the leading, Don't miss that.
 
It was used on some of the older lathes etc instead of bronze bearings surfaces. I also use to have a set of bearing scrapers but they disappeared while I was in the desert years ago,
 
Status
Not open for further replies.
Back
Top