Picked up a couple vices at an estate sale.

ebgb68

Active User
Registered
Joined
Sep 1, 2014
Messages
229
I've needed a vice but was torn on what to buy . Today I ran across both of these for sixty bucks. The tilt model had junk written on it so it's fate is certain both the other one works great a little worn but the jaws look great.
I either did ok or I'm sixty further away from my goal?
29f1794a6e0caf6e61710d2ea0f3b673.jpg89b6a8fa77090f428432fc78ddac1851.jpg

29f1794a6e0caf6e61710d2ea0f3b673.jpg

89b6a8fa77090f428432fc78ddac1851.jpg
 
Looks like a good buy to me.:thumbzup3:
 
The jaw opening is 6 " wide and it opens up to 6" . There are no markings other than a tag on the side missing .
I normally don't find any thing good at sales I went to look at a south Bend lathe and that wasn't what I wanted.
d7af3d918ef286041625784a6e66de3a.jpg

aee51be7d63eb0428c2a69e249e82eef.jpg

d7af3d918ef286041625784a6e66de3a.jpg

aee51be7d63eb0428c2a69e249e82eef.jpg
 
Turn the 6 inch over, and look for a D-6 on the bottom, it could be a Kurt. The tilt vice could be a Palmgren.
 
Back
Top