- Joined
- Sep 2, 2013
- Messages
- 5,098
Now that is an incredible piece of iron/machine, I hope you have the space and the foundation to hold that machine. Really sweet and looking good.
Mark
Thanks Mark. I have 2100 sf on the main floor in the new space, 300 of which is dedicated to my lathes and mills in a separated area. The floor in that space is 6" thick, 4000psi mix, and has an 18" grid of #4 re-bar. Should be more than adequate. Getting ready to apply densifier, and sealer in half of the shop next week, and should be moving the machines in next month some time. It looks like it's going to be a little crowded in there, but I think it will all work out. Cheers, Mike