Pictures of things made in Home Shop CNC

Very cool! I especially love the T-slot table. Those are sort of disposable and being able to make more is always a good thing.

Can I ask if the AR lower is from a forging, an 80% or what?
 
Very cool! I especially love the T-slot table. Those are sort of disposable and being able to make more is always a good thing.

Can I ask if the AR lower is from a forging, an 80% or what?
That was the goal with the table. I can pop the slots out and put something else on there, or if it is damaged, nicked, etc, I can just stick it on the mill and reflatten it.

The lower is billet from a solid block.

Here is a few more pictures of that.
wed6xsr.jpg

JyGIzUI.jpg

tmhwySs.jpg

iHmGzPI.jpg
 
That was the goal with the table. I can pop the slots out and put something else on there, or if it is damaged, nicked, etc, I can just stick it on the mill and reflatten it.

The lower is billet from a solid block.

Here is a few more pictures of that.
View attachment 247128

View attachment 247129

View attachment 247130

View attachment 247131

Again, super cool!

An AR lower from solid billet is on my "one of these days" list, but I have two "0% forgings" to play with. I've already done one from an 80% lower.
 
I’ve been retired for 11 years and work
on these hobby projects almost every day. I actually ran
out of room and gave away many to family members.
Well anyway, here’s another one. A 3 cylinder radial
with a 8” brass propeller I bought off eBay




IMG_4277.JPG

IMG_4278.JPG

IMG_4279.JPG

IMG_4280.JPG

IMG_4291.JPG
 
Back
Top