- Joined
- Nov 7, 2017
- Messages
- 17
Hey guys just so you know exactly what I am talking about the link to the mill and the coolant system are at the bottom. So I have a grizzly mill and I have a mister and it wasn't cutting it so I got a grizzly 7 gal coolant tank flooder...on the mills page it says it has a drain somewhere attachment to the large catch on the bottom this drain is supposed to be attached to the return hose to bring the water back onto the flooding tank....problem is there is no hole or drain anywhere in that catch so i am kinda stuck if anyone has ANY advice I would really appreciate it!
MILL http://www.grizzly.com/products/8-x-30-Vertical-Mill/G0730
flooder http://www.grizzly.com/search/?q=(7+AND+gal+AND+coolant+AND+tank)+OR+(7+OR+gal+OR+coolant+OR+tank)
MILL http://www.grizzly.com/products/8-x-30-Vertical-Mill/G0730
flooder http://www.grizzly.com/search/?q=(7+AND+gal+AND+coolant+AND+tank)+OR+(7+OR+gal+OR+coolant+OR+tank)