Then I put the anchors in. I cleaned out the holes the best I could but as I squirted in the epoxy, it came out the top with some dust. So, I cleaned that off and stuck the anchors in.
Went out to my son's Hockey game (they won! 4-1! PeeWee division!)
That gave the anchors time to set and the epoxy time to harden. With that hardened, I laid on the first layer of the epoxy paint I got to seal the area under the bases of the machines.
I'll do a third coat in the morning and then I'll be mounting machines up.
Second Coat:
Once the third coat goes on in the morning (after the boy's 0815 hockey practice!) I will be able to mount up the lathe. Life is good! I should be able to make chips tomorrow!
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.