- Joined
- Dec 3, 2013
- Messages
- 1,844
On y pm-932 CNC conversion I only have a half height enclosure. I works fine for most things even with the high volume of coolant I run. I do occasionally get some spray over the top but not enough to fret over. I started with a PVC pipe and shower curtain setup and later changed to a frame from 8020, aluminum sheet sides and lexan sliding doors. It is still an open top enclosure. I found that the coolant eventually makes the shower curtain material hard and brittle.
https://www.hobby-machinist.com/threads/pm932-cnc-build.21442/post-432102
https://www.hobby-machinist.com/threads/pm932-cnc-build.21442/post-432102