Possible Grizzly DF-1237G Restoration, Oil Seals?

The cabinet was an option for a few years, and I think it was included only in the last year they sold it. It is a nice cabinet. A big upgrade from a bench.

The PDF in the downloads section is very good. (sorry for the delay in responding: I missed the question...)
 
You will recognize the Grizzly Green. The cabinet has no dents or dings. Most of the discoloration is dried oil or grease that can be cleaned off.
It is 62" long X 13 1/4" wide. The four bolts on this lathe pass through the cabinet, the lathe pan, and then the lathe. They are positioned at 47" long X 6 1/2" Wide. It would be a simple matter to have a different bolt pattern. It stand is solid and rigid.
 
I think my left side seals are gone too, if you find out an easy way to change them, please post a "how to" with pics. Tim
 
I've given up; I just keep filling the bearings every time I use it. I'm not a newbie, but this has defeated me and 2 millwrights.
 
Sorry folks, this Grizzly is gone. Ist guy to look at it took it.
 
Back
Top