2015 POTD Thread Archive

That's the same problem I have Mark.
Looking for the smaller type for 5/8" or 3/4" tool holders.
I can find plenty of the 1" on up.
 
Hey mark, I wonder if one of them do dad's would be complimentary to a radius turner build I wanna start here soon...
 
Great looking grinder. Can you post how you did your wheels and how much crown worked for you?
In a Tom Lipton video he showed a grinder he built and he used 2 degrees for his tracking wheel. I think it worked as the grinder was 25 years old and had been used in a production shop for a number of those years.
 
If you can find the numbers on them I would appreciate it. The ones I find are to large for my holders.

The numbers on the smaller ones are:

ULTRA DEX Tooling Systems
C-WT-001
UTS-105241

I tried to find a web site for these but had no luck.
 
I took delivery of my 3" mitsubishi asx445 6 tooth face Mill today, I mounted it to a shars arbor, and it's not bad, 6tenths runout according to the interapid. So I threw on a wiper insert just to see and oh my god talk about surface finish, on reg hot rolled plate it's like a mirror. I'll show pics once I get my mini pallet faced but I just wanted to share, pretty damn excited and impressed with this one.
 
The numbers on the smaller ones are:

ULTRA DEX Tooling Systems
C-WT-001
UTS-105241

I tried to find a web site for these but had no luck.

Mark they dont seem to fit to the description tables for inserts as well.
The numbers are making no sense.

Inserts.png
 
Back
Top