Power Drawbar Ideals?

[davidcarmichael]

That’s also my problem just not that tall tired getting milk create standing on it.When raise quill you can see DP but as you lower quill the drawbar goes down with it.So I guess do a search on bay for air cylinder see what pops up thanks guys for help

Here is a link to where I posted pictures of my setup.

PM 835S Power Drawbar

So, has anyone installed a power drawbar on a PM 835S? Why would anyone want a power drawbar you ask? The first "big" project I'm doing is going to require an end mill and a drill bit for each step. It is a very odd shaped part and when I get it where I want it I don't want to move it until the...

www.hobby-machinist.com

 

[aliva]

Here's mine post #6
https://www.hobby-machinist.com/threads/power-draw-bar-for-the-bp.78729/#post-672221
amazon has air cylinders you don't need much more than 3" of stroke and enough pressure to hold the air ratchet on the draw bar.

Amazon.ca : air cylinder

 

[Kroll]

Guys quick question about the guide post,looking at some of the Youtubes and some of the pics it looks like the guide post are off center little from the impact.Is this true or am I seeing things if so are the guide post in middle between the actuator and the impact?I'm drilling holes for my impact in plate just wanting to kinda get an ideal for the guide post location.