I finally got back from a trip and into the shop. I took these measurements::
Top of the V-way:: 0.190
Height of the V-way:: 1.005" all the way to the bottom
Width of the V-way:: 0.725
Angle of the V-way:: 42.5º where 90º is straight up
Width of the depression and flat-way:: 1.305
Width of the depression:: 0.345
Width of the flat-way:: 0.815 not including the 45º bevels.
Note: these were taken with a dial caliper and are +/- 0.003" accurate.
For the most part the measurements do not disagree with the ones above, but they are not close enough to confirm either.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.