-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
Query re Dimensions of Front 'V' Way of Grizzly G4003G Lathe
- Thread starter Xiansheng
- Start date
- Joined
- Nov 17, 2017
- Messages
- 1,525
I finally got back from a trip and into the shop. I took these measurements::
Top of the V-way:: 0.190
Height of the V-way:: 1.005" all the way to the bottom
Width of the V-way:: 0.725
Angle of the V-way:: 42.5º where 90º is straight up
Width of the depression and flat-way:: 1.305
Width of the depression:: 0.345
Width of the flat-way:: 0.815 not including the 45º bevels.
Note: these were taken with a dial caliper and are +/- 0.003" accurate.
For the most part the measurements do not disagree with the ones above, but they are not close enough to confirm either.
Top of the V-way:: 0.190
Height of the V-way:: 1.005" all the way to the bottom
Width of the V-way:: 0.725
Angle of the V-way:: 42.5º where 90º is straight up
Width of the depression and flat-way:: 1.305
Width of the depression:: 0.345
Width of the flat-way:: 0.815 not including the 45º bevels.
Note: these were taken with a dial caliper and are +/- 0.003" accurate.
For the most part the measurements do not disagree with the ones above, but they are not close enough to confirm either.