- Joined
- Dec 25, 2011
- Messages
- 10,510
Vince,
I didn't say that ALL of the parts from the Atlas 618 tailstock with fit the casting for the 10100. I said that the ram will fit. The ram screw bearing will also fit. But the ram screw and the handwheel do not have the same part numbers. I don't know what the differences are. One obvious guess would be that they are different lengths. But unless you find a complete 618 tailstock cheap (meaning under $40) I'd buy only the part that you actually need. Otherwise you will have most of the parts left over because you can't use them.
Robert D.
I didn't say that ALL of the parts from the Atlas 618 tailstock with fit the casting for the 10100. I said that the ram will fit. The ram screw bearing will also fit. But the ram screw and the handwheel do not have the same part numbers. I don't know what the differences are. One obvious guess would be that they are different lengths. But unless you find a complete 618 tailstock cheap (meaning under $40) I'd buy only the part that you actually need. Otherwise you will have most of the parts left over because you can't use them.
Robert D.