- Joined
- Mar 7, 2018
- Messages
- 42
This is probably expected for a Chinese machine but I’m asking so I don’t make a mistake. I’ve been trying to get replacement parts for my bt1337g for months now and it’s become apparent it’s not happening. These small boutique sellers just don’t have the support like Grizzly. I need to make my own lead nuts and have a nice bar of bronze here. I’m pretty certain the saddle has a m14 x 2.5 pitch left hand screw. The tailstock is questionable. It’s left hand but the size is more like 13.7mm and the pitch looks like 10tpi. That’s bigger than 1/2 and smaller than 5/8. Nobody makes 9/16 that I’m aware of. The compound is also smaller 13.7 and right hand thread and that one seems to be a 2.5 pitch though a 10tpi gauge also fits nicely in the teeth. This is throwing me off. Obviously either has 10 teeth per inch. I’m going to think that they are all 14mm x 2.5 pitch left and right hand unless someone has some wisdom that may suggest otherwise. Photos attached and in no particular order. I’m tired of the slop so maybe the screws wore down I don’t know I can buy pre cut stock in 36” length and cut off what I need and turn down and thread the ends. My other option is to spend more money and buy a handful of grizzly parts and see what may fit.
Attachments
-
C75FB9F8-AECE-44B3-8D55-98087EF6DF96.jpeg43.1 KB · Views: 109
-
C6F57DBB-F53D-4F6C-AE09-47E8F9B0D472.jpeg49.1 KB · Views: 112
-
1DE0B5C3-D320-49B8-9049-1322332CEB0C.jpeg64 KB · Views: 114
-
E8437931-5602-4C3C-811F-AEC58A272B3A.jpeg37.3 KB · Views: 129
-
DC10F052-BF65-41BC-819F-0655709883F3.jpeg49.2 KB · Views: 121
-
DC910A2B-9797-4767-83CC-54E363F79A21.jpeg68.1 KB · Views: 112
-
1E761354-C749-4EA0-A181-8F3113394FA3.jpeg34.8 KB · Views: 117