- Joined
- Nov 19, 2014
- Messages
- 991
My Son and Driver spun in turn two at Sheridan (Wyo) Speedway to avoid T-Boning the knothead who spun in front of him. We just clipped the turn 2 wall and were able to finish the race, 5th place, and the knothead didn't. It dosn't look too bad...until you get the sheet metal pulled off, the car was built as an experiment with an under slung rear clip, racing is about following the fads, now everyone is going to over rail rear clips, so we will cut it off and rebuild. If we had been running for points I would have just heated it up and straightened it out