- Joined
- Sep 10, 2013
- Messages
- 562
Can anyone tell me how to get the little jumper between PLC-24 out of the little green terminal blocks? I need to move to L-PLC.
Thanks
CH
Thanks
CH
Last edited:
Well I did that got the info from manual sec4-9 and held the orange tab pushed in as far as it wold go and nota, want come out either side??? I got a bunch of those phoenix crimp pins to make a new one, but don’t want to back my VFD control terminal. Thank for your reply.Using a small straight blade screwdriver, push on the orange rectangle just above where the wire goes in. This will release the spring tension on the terminal, and the wire can be removed. You have to keep pushing, while you pull on the jumper.