Results on a Okuma CNC Machining Center

middle.road

Granite Stoopid...
H-M Supporter Gold Member
Joined
Apr 28, 2014
Messages
3,589
This was from March 5th... https://www.bidspotter.com/en-us/auction-catalogues/bscfu/catalogue-id-bscfu10149
One of the few that are still leaving their hammer prices up.
Only $1900.00
1584476923834.png

I was watching this. Looks like it was the leftover base of a CMM.
A tad too large for my shop... :grin:

1584477019719.png
 
Could have used this machine today! Making 6 sets of work rolls for 2 of our hot rolling machines, and using a manual lathe. Same as these that I made a while back, but we have modified the design by removing 2” off each end. I have 3 rolls left to do and then I move to heat treat, and finish grind on our cylindrical grinder. Last step is to send out for coating. Hope to finish this week the machining part. Then the heat treat which has to be scheduled in between paying jobs, could take a couple weeks before they are ready for the grinder.
Pierre

5D8D25A4-D69E-4CCE-9F06-9C66DDFBF4E1.jpeg
 
Back
Top