- Joined
- Jul 13, 2014
- Messages
- 1,051
Would like to get a quote for a spider.
Material -Steel
Diameter - 6 inch
Thickness - 1 1/2 inches
Center hole - 2 1/2 inches
Mounting holes - 5 inch bolt circle, 90 degrees apart, counter sunk for 1/2 inch socket heads, 4 holes
Jack (spider) screws, 1/2 x 20, 4 holes 90 degrees apart, cut a flat at each entry hole for lock nut.
Here is a spider sample for reference, a smaller one, 5 inch diameter, and aluminum
Material -Steel
Diameter - 6 inch
Thickness - 1 1/2 inches
Center hole - 2 1/2 inches
Mounting holes - 5 inch bolt circle, 90 degrees apart, counter sunk for 1/2 inch socket heads, 4 holes
Jack (spider) screws, 1/2 x 20, 4 holes 90 degrees apart, cut a flat at each entry hole for lock nut.
Here is a spider sample for reference, a smaller one, 5 inch diameter, and aluminum
Last edited:
