Rockwell Vertical Mill fine feed clutch cone

John_Dennis

Active User
Registered
Joined
Mar 5, 2014
Messages
301
Does anyone have a photo or diagram of the fine feed cone? Or one for sale. Is it steel, cast iron, or brass?

Thanks
JD
 

machPete99

Registered
Registered
Joined
Dec 12, 2016
Messages
389
I replied on the io forum but it may be a few days before in "clears".
The cone part is made of steel, 0.590" thick, 1.007" ID, 1.750" OD.
Has 0.125" internal keyway by 0.0.075" deep.
Bevel angle is 10 degrees measured from one side.

rockwell_quill_feed.jpg
 

Weldingrod1

Registered
Registered
Joined
Oct 14, 2013
Messages
507
There's an exploded view in the manuals.

Sent from my SM-G892A using Tapatalk
 

John_Dennis

Active User
Registered
Joined
Mar 5, 2014
Messages
301
Thanks, I successfully made one, I made a spacer for my broach to accommodate the undersized keyway cutter.
 
It can take up to an hour for ads to appear on the page. See our code implementation guide for more details. If you already have Auto ad code on your pages there's no need to replace it with this code
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock