Rockwell Vertical Mill fine feed clutch cone

John_Dennis

Active User
Registered
Joined
Mar 5, 2014
Messages
379
Does anyone have a photo or diagram of the fine feed cone? Or one for sale. Is it steel, cast iron, or brass?

Thanks
JD
 
I replied on the io forum but it may be a few days before in "clears".
The cone part is made of steel, 0.590" thick, 1.007" ID, 1.750" OD.
Has 0.125" internal keyway by 0.0.075" deep.
Bevel angle is 10 degrees measured from one side.

rockwell_quill_feed.jpg
 
There's an exploded view in the manuals.

Sent from my SM-G892A using Tapatalk
 
Thanks, I successfully made one, I made a spacer for my broach to accommodate the undersized keyway cutter.
 
I don't yet have the know-how to make these parts but I'd certainly be interested in the pieces if anyone has them for sale. My machine came with a spring inside the casted fine-feed housing to return the quill, which is nice but I'd like to get it back to it's original parts. Thank for any assistance or leads. -John
 
Back
Top