Rohm 6 inch 6J set thru chuck

Bamban

Active User
H-M Supporter Gold Member
Joined
Jul 13, 2014
Messages
1,051
Do any of you guys have any experience with these brand chucks?
 
Thank you, Jim.

It is a brand not mentioned in most threads I read. In terms of quality would you say they compare favorably against PB, Buck, or Bison?

Nez
 
I have a 6.5" 3jaw and a 6.5" 4 jaw, non- set Tru Rohm Chuck. Superb build quality and function from a premier German maker. Smooth, tight and accurate. If you can afford them, go for it.
 
Thank you, Jim.

It is a brand not mentioned in most threads I read. In terms of quality would you say they compare favorably against PB, Buck, or Bison?

Nez

I'm not really able to make a comparison, I have never used the others.
 
I have a 3 jaw NOS I bought for just over $200. The runout is amazing~.0005" maybe slightly less.
Are you seeing that eBay listing?
 
I think there German made still, if so it should be a a very high quality and tight tolerances. They don't get much better with out spending two arms and one leg to buy.
 
IMHO, no chuck is good enough until it’s a set-tru. If the chuck is not a set-tru type, I would keep looking until I found one. My three cents…Dave
 
Back
Top