Roller made from old printer parts

cathead

CATWERKS LTD
Registered
Joined
Feb 7, 2013
Messages
2,481
The junk printer parts I had saved served me well this time. I used two rollers and a shiny steel rod from an old printer to make this roller. It will be used on the surface plate to spread around the Prussian blue when scraping
in some surfaces. The handle was made from an aluminum rod 3/4 inch in diameter and the supporting bar is
a piece of 1/8 by 3/4 mild steel. View media item 95797
 
Last edited:
Back
Top