Hi guys, new to this forum and site. Been working on this project since last month and am wondering whether treadmill motor conversions are still of interest in machining forums. If so, would this be the right forum to post something like this?
Here's a video (excuse the poor quality) of me testing the feasibility of integrating a tachometer with the MC-70 controller without needing an extra power supply. Also, I'm using the same sensor taken from the treadmill;
Here's a video (excuse the poor quality) of me testing the feasibility of integrating a tachometer with the MC-70 controller without needing an extra power supply. Also, I'm using the same sensor taken from the treadmill;