[Lathe] Samson Lht-25b Turret Lathe

Man I wish one would drop in my lap. Use to love running the little ones over those behemoth W&S man makers or killers . Nice job good luck with her .
 
thanks Silverbullet,
the lil samson lathe is beautiful to work with, very simple and robust.
i like to just hear her run!
 
Remember if you need turret tooling I have some 1" and 1 1/4 and one 1 1/5 with an adapter to 1".
That I currently have no machine to fit it to.
Got any breakdowns on the geometric die heads. One missing some parts on eBay at fair price. I have a big one that takes six cutters over an inch threads . And I want a 9/16 head.and or a 5/16 . Have lots of cutters in the small sizes.
 
Remember if you need turret tooling I have some 1" and 1 1/4 and one 1 1/5 with an adapter to 1".
That I currently have no machine to fit it to.

I forgot all about it.
Thanks for the reminder.
Do you have a break down of what you have available?

Daryl
MN
 
20170820_155356_001.jpg
Do you have a break down of what you have available?

Starting at top left 1 1/4 shank x 1 1/2 holder?
Next to it: 1" shank 2 tool bit holder missing one semi circle for one tool holder.
Next is a 1 1/2 shanked box tool with an adapter to 1"
Upper right kinda a box tool ...1" shank
lower left: 2 tool 1" shank carbide insert bits that appear to me to be turned sideways.
Lower middle: 1" shank 2 tool holder with HSS bits
Lower right: 1" shank 2 tool holder with 1 holder with a hss bit.
 
Back
Top