Servo tuning

native34

Registered
Registered
Joined
Nov 17, 2014
Messages
42
I have a CO 12z mill. It is equipped with the old style kelinginc servo motors with amt102v encoders. With that being said, I have a couple of questions.

1. What is considered low for gain and what are the effects of having the gain to low?

2. What is an acceptable gain setting I should be shooting for?
 
here is a good manual for manual servo tuning. Even thought it is written for galil, the method is the same.
 

Attachments

  • Galil manula servo tuning note5491.pdf
    699.8 KB · Views: 5
  • tuning.pdf
    20.8 KB · Views: 5
Back
Top