Sharp Lmv

[wrmiller]

A bit much for most HMs, and if the timing/location wasn't so screwed up, I would already have it. But having said that...

For those who might be interested, this appears to be a mill in excellent condition with some very high-dollar extras.

https://phoenix.craigslist.org/evl/tls/5283306470.html

 

[Sandia]

Good price on that mill,if nothing is wrong. I would jump on it in a minute if I needed one and lived in that area.

 

[brav65]

Hey Bill I bought a bunch of starrett precision ground stock from that guy. He retired at the end of last year and has been selling off all of his tooling, materials and machines. His shop is spotless, but not a real friendly guy.

 

[wrmiller]

If I was already moved back down there, I'd have already contacted him.

 

[gi_984]

[QUOTE not a real friendly guy QUOTE]
He is probably tired of all the tire kickers and low ballers wasting his time. I had to deal with this when selling my Burke Millrite when I wanted to upgrade to a bigger machine. So the experience might have "soured" his disposition. Not to mention it is probably hard to let go of his shop stuff. Not looking forward to the day when I will have to deal with the selling of my shop.