Cables Managed:
I had a couple of false-starts with the flashing/cover using aluminum sheet. Finally decided to switch up to plastic. This gives two benefits: A) I can easily see if something jams up the tracks and B) I can see where to drill the darn screw-holes
Actually used the lid of an empty screw box.
And here she is, complete, with axes labels.
I'm very happy with how this turned out. Learned a bunch from this process, so I suspect the mill will be a little easier in some respects.
FYI, once I get the shop cleaned up, I'm happy to measure & draw-up the brackets I fabbed before I start in on the mill. If nothing else, gives you a starting-point... Let me know.
I had a couple of false-starts with the flashing/cover using aluminum sheet. Finally decided to switch up to plastic. This gives two benefits: A) I can easily see if something jams up the tracks and B) I can see where to drill the darn screw-holes
Actually used the lid of an empty screw box.
And here she is, complete, with axes labels.
I'm very happy with how this turned out. Learned a bunch from this process, so I suspect the mill will be a little easier in some respects.
FYI, once I get the shop cleaned up, I'm happy to measure & draw-up the brackets I fabbed before I start in on the mill. If nothing else, gives you a starting-point... Let me know.