Shop Heat

Guys an update. I'm returning all the 1" lines and buying all 1/2" instead. I read this and realized since I have 2psig coming out of the meter I'll Have more than enough flow.
 
Guys an update. I'm returning all the 1" lines and buying all 1/2" instead. I read this and realized since I have 2psig coming out of the meter I'll Have more than enough flow.
You can Google pipe size considering length of run and heater size. I'm putting in a 125,000 btu heater which was okay with around a 75' run of 1/2" black pipe before having to bump up to 3/4" (my run is only about 12'). I'll do some searching and see if I can find the link again.

Bruce
 
Size depends on your pressure. At normal 8inwc I would've needed 1" but my service is 2psig. 1/2' will be more than plenty for a 130' run.
 
Back
Top