- Joined
- Oct 17, 2015
- Messages
- 148
While installing the coolant system on my PM 1340 GT I found a conflict with the installed DRO reader head support bracket. Because I had ordered the taper attachment, the reader support bracket had to be shifted to the rear somewhat to expose the cross slide for mounting the taper components. The coolant supply pipe location was directly above this point and blocked by this bracket. Two longer socket head screws (M6x1, 45mm long) and two unthreaded spacers (16 mm long) did the trick! It's very tight but everything clears.
Now I just need to come up with a way to support an hold the two DRO cables and coolant line in place so they don't rub on the tray and backsplash.
Now I just need to come up with a way to support an hold the two DRO cables and coolant line in place so they don't rub on the tray and backsplash.