Solar Lunar box

rdean

Active User
H-M Supporter Gold Member
Joined
Feb 2, 2014
Messages
1,043
I saw this on a wood working site and decided to give it a try. I didn't have any wood large enough to make it full size so I collected the pieces I had and modified the design.
It is made of poplar and finished with clear spray can spray.
It is 88% of the original size including the thickness of the material.

GEDC4122.JPG


GEDC4124.JPG


GEDC4125.JPG

Thanks for looking.

Ray
 
Beautiful work. Was the carving done by hand or machine program? Thanks for posting.
 
Done by machine.
I am not an artist or a carver.

Thanks all

Ray
 
Excellent Job!!!
 
Wat tools did you use? I ask because some cuts look like an engraving bit and others not so sharp. Just curious


Sent from my iPhone using Tapatalk
 
Very nice work.
Chuck
 
I used a 60 degree V bit for all design features. The depth of cut is controlled by the width the vectors and rises up at each end.

Thanks to all

Ray
 
Back
Top