-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
Something missing on my Burke #4 universal milling head??
- Thread starter Glenn Brooks
- Start date
- Joined
- Dec 15, 2011
- Messages
- 191
Glenn,
I'm sure you know that the bushing is offset for the overarm so the head can be adjusted and tightened. The head uses #3 collets and possibly #at
from the atlas lathe. The draw bar for the head should be fairly easy to make try 12L14 easy to machine. May also have to silver solder a pin in the draw tube so the collet stays put Im not sure about I would need to check mine. Here is a PDF on set up for the mill attached by James Benjamin..
I'm sure you know that the bushing is offset for the overarm so the head can be adjusted and tightened. The head uses #3 collets and possibly #at
from the atlas lathe. The draw bar for the head should be fairly easy to make try 12L14 easy to machine. May also have to silver solder a pin in the draw tube so the collet stays put Im not sure about I would need to check mine. Here is a PDF on set up for the mill attached by James Benjamin..
Just remembered this and thought it might be of some help.
http://jamesriser.com/Machinery/Burke/MillingMachine.html
http://jamesriser.com/Machinery/Burke/MillingMachine.html