- Joined
- Aug 3, 2017
- Messages
- 2,437
Also note that even a QCGB requires at least 1 additional stud gear to even use the whole chart. See this one I found for a 9A: https://www.practicalmachinist.com/...-part-1-removal-disassembly-index-plate-1.jpg
In order to get the top row, you need a 40 gear tooth on your stud-gear. Everything else uses a 20. Once you recognize the relationship between the two rows (stud gear ratio is the same as gearbox ratio!) you can discover a bunch of new options!
In order to get the top row, you need a 40 gear tooth on your stud-gear. Everything else uses a 20. Once you recognize the relationship between the two rows (stud gear ratio is the same as gearbox ratio!) you can discover a bunch of new options!