South Bend shaper

buggsy

Registered
Registered
Joined
Mar 28, 2013
Messages
30
I just picked up SB shaper and i'm taking it apart for clean, inspect, and paint. I was wondering if anyone can tell me how to get at the set screw at the bottom of the rocker arm? I'll have more questions as I go along. Pictures a little later.
Thanks
Buggsy
 
Are you talking about #73 below? If so, that should be about a 3/8 square head. Reach down in there and turn it loose. PIA if there is oil in the bottom.:confused 3:
Capture.JPG
 
Last edited:
shaper.jpg shaper 2.jpg Hi all, Here's a few pics of my shaper before and after. I've been looking for a long time for one of these, finally got one.

Buggsy
20170321_115734.jpg 20170321_115726.jpg 20170320_130733.jpg 20170318_183802.jpg 20170313_191700.jpg 20170313_191654.jpg 20170313_191528.jpg 20170313_191518.jpg 20170313_191407.jpg 20170318_194119.jpg 20170320_130854.jpg
 
Nice job on the clean up. Did they come in Grey as an "original colour"?

Cheers Phil
 
You could paint it pink and yellow and they still look good . It's the machine not the color.
 
Back
Top