- Joined
- Sep 2, 2013
- Messages
- 39
Hello,
Here is my Stirling's Engine (alpha type). It is, for the moment, the best Stirling I made.
[video=youtube;gB-OwTMzXhc]http://www.youtube.com/watch?v=gB-OwTMzXhc&feature=share&list=UUbRpiLu8jujmNDsPg1eqO lw[/video]
One years later, it became that. A Stirling engine pressurized and water cooled.
[video=youtube;hTJvUXD8_h8]http://www.youtube.com/watch?v=hTJvUXD8_h8&feature=share&list=UUbRpiLu8ju jmNDsPg1eqOlw[/video]
And 6 month later, it has been turned in a 4 cylinders.
[video=youtube;fGRz9ujCtWc]http://www.youtube.com/watch?v=fGRz9ujCtWc&feature=share&list=UUbRpiLu8ju jmNDsPg1eqOlw[/video]
And here is his little brother (which is bigger). It run not as well but it is not at the end of his evolution. I designed it to be pressurized from the start. It was not the case for the first. So this one, normally, will be pressurized with helium. In the video below, it is not yet pressurized, it was its firsts runs. I will make that this winter. It is often in winter that I work on this subject.
[video=youtube;tUjyrI9hQDQ]http://www.youtube.com/watch?v=tUjyrI9hQDQ&feature=share&list=UUbRpiLu8ju jmNDsPg1eqOlw[/video]
This little engines are useless. I made them to study them. My ultimate goal is to made one which is enough powerfull to produce electricity for my home in cogeneration and which is not expensive to make. It is a long way project.
Titou16
Bye
Here is my Stirling's Engine (alpha type). It is, for the moment, the best Stirling I made.
[video=youtube;gB-OwTMzXhc]http://www.youtube.com/watch?v=gB-OwTMzXhc&feature=share&list=UUbRpiLu8jujmNDsPg1eqO lw[/video]
One years later, it became that. A Stirling engine pressurized and water cooled.
[video=youtube;hTJvUXD8_h8]http://www.youtube.com/watch?v=hTJvUXD8_h8&feature=share&list=UUbRpiLu8ju jmNDsPg1eqOlw[/video]
And 6 month later, it has been turned in a 4 cylinders.
[video=youtube;fGRz9ujCtWc]http://www.youtube.com/watch?v=fGRz9ujCtWc&feature=share&list=UUbRpiLu8ju jmNDsPg1eqOlw[/video]
And here is his little brother (which is bigger). It run not as well but it is not at the end of his evolution. I designed it to be pressurized from the start. It was not the case for the first. So this one, normally, will be pressurized with helium. In the video below, it is not yet pressurized, it was its firsts runs. I will make that this winter. It is often in winter that I work on this subject.
[video=youtube;tUjyrI9hQDQ]http://www.youtube.com/watch?v=tUjyrI9hQDQ&feature=share&list=UUbRpiLu8ju jmNDsPg1eqOlw[/video]
This little engines are useless. I made them to study them. My ultimate goal is to made one which is enough powerfull to produce electricity for my home in cogeneration and which is not expensive to make. It is a long way project.
Titou16
Bye
Last edited: