Greetings, I am having trouble removing the drawbar on my Index 55 mill. As I turn it clockwise it binds up. Turning it counter clockwise does not allow me to remove it either. It had a collet type holder in when I purchased the machine. Had one heck of a time removing it. I have five 5 B&S No. 9 tool holders for the machine and a lot of end mills to use, but cannot tighten enough to keep from slipping. So I decided to remove the drawbar.Then I decided to remove the quill. Gasp, what a problem I made for myself. I read the thread on removing the quill, but am stumped on the drawbar too.
sitn
sitn