-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
Takisawa Lathe
- Thread starter Janderso
- Start date
- Joined
- Jan 28, 2016
- Messages
- 21
How difficult/expensive is that ELS? I just bought a Lux Cut 1230 (Taiwan machine from the early 80's) that doesn't have the change gears for metric. I was trying to find them, but I'm intrigued by this ELS option.
- Joined
- Jan 10, 2019
- Messages
- 1,042
There's a huge thread on it here: https://www.hobby-machinist.com/threads/electronic-lead-screw.76101/
For me it was about $350, but that's everything. Keep in mind that even if you buy a commercially available ELS, you still have to add the cost of everything to adapt it to your particular lathe. That may well include a power supply, servo/stepper, encoder, brackets, gears, and belts. That alone will be $$$.
For me it was about $350, but that's everything. Keep in mind that even if you buy a commercially available ELS, you still have to add the cost of everything to adapt it to your particular lathe. That may well include a power supply, servo/stepper, encoder, brackets, gears, and belts. That alone will be $$$.