• We want to encourage those of you who ENJOY our site and find it USEFUL to DONATE and UPGRADE your membership from active member to donating or premium membership. If you want to know the differences in membership benefits, please visit THIS PAGE:

    https://www.hobby-machinist.com/premium/

    Donating memberships start at just $10 per year. These memberships are in fact donations that help pay our costs, and keep our site running!
    Thank you for your donation, God Bless You

[4]

Takisawa MAC-V1E

[3]
[10] Like what you see?
Click here to donate to this forum and upgrade your account!

timberg

Swarf
Registered
Joined
Dec 7, 2016
Messages
14
Likes
1
#1
Not knowing much about CNC machines except for edge finding, tool touch off, and some basic offsets that I help with in a production shop. So you could say that I'm your basic "load part, push start" kind if guy. Friend of mine ran across a good running Takisawa MAC-V1E with Fanuc 0MB steering for a very good $. Just now getting the machine fired up and going through all the manuals that came with it and for the life of me I cannot figure out how to load tooling into the carousel. There is no dedicated tool button unlike the HAAS's and Miltronics that I'm used to. So anyone out there that may have some experience with is model, please steer me in the right direction. Thanks in advance!
 

countryguy

Active User
Registered
Joined
May 7, 2014
Messages
769
Likes
218
#2
[6]
[5] [7]
Top