Test with pictures

IR-JEB

H-M Supporter - Sustaining Member
H-M Platinum Supporter
Joined
Feb 9, 2022
Messages
29
Below is a picture of the tube for the stand ready to weld up.
20220409_152553_std.jpg

20220409_152553_std.jpg



I wanted to test the hole locations in the riser block for proper spacing before drilling the chip pan. I set the mill on the riser and used guide pins to verify a good fit.

20220424_105856_std.jpg

20220424_105856_std.jpg
 
Back
Top