I took a HP435 toner cartridge apart to recycle a couple of small coil springs but found that there are some other interesting parts.....
from left to right;
+two different sizes of squeegees on steel angle iron (might make a good rakes for cleaning the chip pan, or way wipers)
+a rubber coated rod that must be very straight
+a coated thin walled aluminum tube that must be very straight
+a smaller coated aluminum tube
+a magnetized rod that would be good for picking chips out of tight places, etc.
How is that for trivia!
from left to right;
+two different sizes of squeegees on steel angle iron (might make a good rakes for cleaning the chip pan, or way wipers)
+a rubber coated rod that must be very straight
+a coated thin walled aluminum tube that must be very straight
+a smaller coated aluminum tube
+a magnetized rod that would be good for picking chips out of tight places, etc.
How is that for trivia!