Tool grinder Interwood

[Nick spanners]

Hi
I recently purchase an interwood tool grinder off eBay, type MK VI. 345
It seems an interesting machine
Just wondering if anyone has a manual or experience with these

The motor / grinding wheel can be adjusted to any angle, the motor can then the wound up and down
The tool holder can be adjusted to a multitude of angles, the moved in / out to the grinding wheel

The machine looks to have many options for grinding different tools
I can not immediately see how I would grind a drill?
Any feed back would be apreciated

 

[pstemari]

Depends on exactly what sort of grind you want, but for a basic four-facet grind you'd need to rotate that fixture 31° in the horizontal plane and vertically about 7° to grind the primary relief, and then increase the vertical angle a bit more to grind the secondary relief. That holder should have a facility to rotate the drill 180° in place.

Sent from my Pixel XL using Tapatalk

 

[Nick spanners]

The general grinding principle looks to be in at a Tangent to the grind stone

 

[Nick spanners]

The general grinding principle looks to be in at a Tangent to the grind stone

The holder has a 12-hole indexing head with fine adjustment via two bolts on top