- Joined
- Sep 25, 2014
- Messages
- 1,094
Could someone please post me a picture of the Spindle wrench for the ToolMaster 1D (has the #40 taper, the spindle is locked at the top with the "fork", then you put the wrench in the flats at the bottom)?
Also, how thick is it (obviously something a bit under 0.50")?
I am gradually getting my machine up and running (still more cleaning, made a knee crank) next project is the spindle wrench.
I'm guessing the original is ~1/4" thick, with an opening of 2.260".
Regards, David
Also, how thick is it (obviously something a bit under 0.50")?
I am gradually getting my machine up and running (still more cleaning, made a knee crank) next project is the spindle wrench.
I'm guessing the original is ~1/4" thick, with an opening of 2.260".
Regards, David