VDI 30 Plug

H-M experienced a site wide outage on January 23. To the best of our knowledge, the site has been restored up to January 1, 2020. Common problems are going to be missing posts, reverted membership levels and other time related problems that will potentially have been lost between January 1-23.

Please click on this notice to be taken to the Site Support Forum so you can learn more about what happened, what is being done and post a support request so we can help you get your issue resolved.

forhire

Registered
Registered
Joined
Dec 31, 2018
Messages
46
I needed some VDI 30 plugs or covers for the lathe turret. At about $70 each plus shipping I decided to make them. I didn't think to snap any turning photos but I did capture some milling, bead blasting, and finished photos. I parkerized them in manganese phosphate using a small PID controller and hotplate. I've used them for a few weeks and they have been great. No more filling my VDI pockets with chips. ;)

IMG_4492.JPG IMG_4493.JPG
IMG_4494.JPG IMG_4495.jpg
 
It can take up to an hour for ads to appear on the page. See our code implementation guide for more details. If you already have Auto ad code on your pages there's no need to replace it with this code
Top