VFD for Mill

This is where I started running into problems, since I have two separate buttons for Start and Stop, i was picking through the diagrams and using (trying) the diagrams that applied, and it didn't work. I need to head off to work now, will be home this afternoon. Thanks Karl
 
When you get back, let's do this option:
Capture.JPG
 
wiring.jpg

Here's my wiring project for today. Reason I'm showing this is the use of wire insulation color. blue is always +12V, white is DC common, other colors are IO.

If you can find four colors of wire, do the above print with one color for each wire. makes it real easy to check its right. Also you could show a pic for an easy double check.
 
Back
Top