All,
A friend of mine needed a few switching devices made to enhance his camera switcher used to toggle what camera your looking at in your vehicle.
mostly for trucks that pull trailers.
anyways I helped him with the project all the way from selecting a project box>>general design>>schematic>> components>>pcb >> and soldering it all up.
I cut the parts entirely on a Taig mini mill thats cnc'd was an easy project.
They were double sided pcbs all cut 6up. and then scored for easy splitting.
Enjoy
Sam
6 up cutting the traces.(above)
the entire board already cut and drilled
Parts split and laid next to the project box
Just another view with the components sitting on the board.
A friend of mine needed a few switching devices made to enhance his camera switcher used to toggle what camera your looking at in your vehicle.
mostly for trucks that pull trailers.
anyways I helped him with the project all the way from selecting a project box>>general design>>schematic>> components>>pcb >> and soldering it all up.
I cut the parts entirely on a Taig mini mill thats cnc'd was an easy project.
They were double sided pcbs all cut 6up. and then scored for easy splitting.
Enjoy
Sam
6 up cutting the traces.(above)
the entire board already cut and drilled
Parts split and laid next to the project box
Just another view with the components sitting on the board.