- Joined
- Sep 10, 2013
- Messages
- 562
Well it got here today, It is in the shop and the stand is unpacked that is all I got done so far. I thought the stand was black but it is kind of a gray. I plan to paint it with a graphite color wheel paint that is tough as an old boot. The lathe looks well packed and there don't appear to be any major damage to the crate. Can't say the same for the stand the card board boxes where not strapped to the palette so they took a good bit of bouncing around. That is another reason to paint them before assembly.
Now for the first job of cleaning the Cosmo off the lathe. I used WD on the mill and that was less than fun. It worked but there was cosmoline and WD 40 al over the place. Is there any thing better? Something that might work better?
Pix tomorrow.
CH
Now for the first job of cleaning the Cosmo off the lathe. I used WD on the mill and that was less than fun. It worked but there was cosmoline and WD 40 al over the place. Is there any thing better? Something that might work better?
Pix tomorrow.
CH